

Regulator 1st + 2nd Stage DIN - Superior
TR-80-DIN

The innovative design of the TR-80's front cover is unique - as we have positioned the water inlet openings on the side of the regulator. This means dynamic pressure cannot affect the inhalation membrane. This effectively prevents free-flow when diving in strong currents or with scooters.
Our top TR-80 regulator is certified for diving in waters below ten degrees Celsius. Its structural design made of solid brass guarantees the best protection against icing. The membrane-compensated design with dry sealing of the first stage further supports the regulator's suitability for cold water.
The balanced first and second stages made of sandblasted brass not only look super chic in a matt chrome finish, the compensation of the second stage also ensures that your inhalation comfort remains unchanged during the dive - regardless of your depth or the remaining pressure in the tank.
The regulator's exhaust valve and exhaust deflector have been optimised to reduce the exhalation effort and thus increase overall breathing comfort. The exhaust deflector also reliably directs gas bubbles away from your face. The comfortable mouthpiece of the second stage is made of hypoallergenic silicone and ensures a secure and comfortable fit in the jaw.
The adjustable Venturi (dive/predive) is primarily designed to prevent free-flow on the surface and to reduce the inhalation effort during the dive. The adjustment knob allows you to further finetune your personal inhalation comfort. The average work of breathing of the regulator is 0.8 J/L - an ideal value, not too zappy and not too sluggish.
Configure your regulator conveniently with 2 HP 7/16 UNF and 4 LP 3/8 UNF outlets. The LP hose is tested for a maximum pressure of 34 bar.
Designed and engineered in Germany. Made in Europe.
Connector: | DIN |
---|
The innovative design of the TR-80's front cover is unique - as we have positioned the water inlet openings on the side of the regulator. This means dynamic pressure cannot affect the inhalation membrane. This effectively prevents free-flow when diving in strong currents or with scooters.
Our top TR-80 regulator is certified for diving in waters below ten degrees Celsius. Its structural design made of solid brass guarantees the best protection against icing. The membrane-compensated design with dry sealing of the first stage further supports the regulator's suitability for cold water.
The balanced first and second stages made of sandblasted brass not only look super chic in a matt chrome finish, the compensation of the second stage also ensures that your inhalation comfort remains unchanged during the dive - regardless of your depth or the remaining pressure in the tank.
The regulator's exhaust valve and exhaust deflector have been optimised to reduce the exhalation effort and thus increase overall breathing comfort. The exhaust deflector also reliably directs gas bubbles away from your face. The comfortable mouthpiece of the second stage is made of hypoallergenic silicone and ensures a secure and comfortable fit in the jaw.
The adjustable Venturi (dive/predive) is primarily designed to prevent free-flow on the surface and to reduce the inhalation effort during the dive. The adjustment knob allows you to further finetune your personal inhalation comfort. The average work of breathing of the regulator is 0.8 J/L - an ideal value, not too zappy and not too sluggish.
Configure your regulator conveniently with 2 HP 7/16 UNF and 4 LP 3/8 UNF outlets. The LP hose is tested for a maximum pressure of 34 bar.
Designed and engineered in Germany. Made in Europe.
Connector: | DIN |
---|